How to Choose the Correct Replacement Power Adapter for Your ENGLAON TV

If you need a replacement power adapter, it is important to select the correct specification to ensure safe and stable operation.

Step 1 — Confirm Voltage (Must Match)

How to Identify the Correct Amp Rating (3A / 4A / 5A)

You can determine the correct adapter by using one of the following methods:

Method 1 — Check the Original Power Adapter or Check the TV Rear Label

Look at the label on your existing adapter.

You will see a specification similar to:

• Output: 12V ⎓ 3A
• Output: 12V ⎓ 4A
• Output: 12V ⎓ 5A

The number after “A” is the required amp rating.

Method 2— Identify by Model Number

Step 2 — Select the Correct Amp Rating (Most Important)

You must choose an adapter with equal or higher current (A) than required.

If your TV label shows:• DC 12V ⎓ 4A

Then:

• You can use a 4A adapter (recommended)
• You can also use a 5A adapter (safe)
• You should NOT use a 3A adapter (insufficient power)

Important Notice about using other Power Adapters

Third-party (non-ENGLAON) power adapters may be used, however this is not recommended.

• Warranty may be declined if issues are caused by non-original or incompatible adapters
• Damage from incorrect or unstable power supply is not covered

All ENGLAON adapters are:

• Tested for compatibility
• SAA approved and compliant with Australian standards

For safety and warranty protection, we recommend using an official ENGLAON power adapter.